240x320 Pixels Small TFT Screen , 18 BIT 2.8 Inch Small TFT LCD
Display
Product Details
| Size (inch): | 2.8inch |
| Resolution: | 240*320 |
| Brightness (cd/㎡): | 300 |
| Interface: | 3 Wire 4 Wire SPI MCU 8/9/16/ 18 BIT RGB 6/16/18BIT |
| Name: | Small TFT Screen |
Product Description
This IPS TFT LCD Display is a color-active matrix thin-film
transistor (TFT) liquid crystal display (LCD) that uses amorphous
silicon TFT as a switching device. If your product requires a size
2.8 inch then our lcd is just what you need. Improve your product
design by adding our 240 * 320 resolution product. QC department
measured the luminance is 300 nits under normal operating.
| Size(inch) | 2.8 |
| Resolution | 240*320 |
| Brightness(cd/m²) | 300 |
| Interface | 3 wire 4 wire SPI MCU 8/9/16/ 18 BIT RGB 6/16/18BIT |
| Driver Ic | ST7789V |
| Operation Temperature(°C) | -20~70 |
| Pin Number | 40 |
Basic parameters:
Resolution: 240x320 pixels, meaning there are 240 pixel points in
the horizontal direction and 320 pixel points in the vertical
direction, which can clearly display images and text.
Color depth: 18-bit color depth, capable of displaying 262K colors,
with rich and realistic colors, and can better reproduce the true
colors of the image.
Screen size: The diagonal size is 2.8 inches, the effective display
area is usually 43.2mm×57.6mm, the size varies slightly depending
on the different models, generally around 50.0mm×69.2mm, and the
thickness is approximately 2.35mm-2.5mm.
Viewing angle: Some adopt IPS technology, which can achieve full
viewing angle, maintaining good color and brightness consistency at
all angles.
Operating temperature: The general operating temperature is -20℃ to
+70℃, the storage temperature is -30℃ to +80℃, and it can adapt to
certain ranges of environmental temperature changes.
Performance features:
Outstanding display effect: With a resolution of 240x320 and 262K
color display, the image and text are displayed clearly and
vividly. The IPS full-view technology enables users to have a good
visual experience from different angles.
Flexible functions: Supports landscape and portrait display,
allowing for free switching according to actual needs. It also
supports the display of various formats of images, such as BMP,
PNG, JPG, GIF, etc.
Rich interfaces: Common communication interfaces include TTL232,
RS232, RS485, USB, CAN, network port, etc. These interfaces
facilitate convenient connection with various devices for data
transmission and interaction.
Application fields:
Applicable to various fields such as medical monitoring devices,
handheld devices, digital signage, automotive displays, industrial
displays, game consoles, control panels, etc. It can provide
intuitive human-computer interaction interfaces or information
display functions for different devices.
FAQ:
1. I want the LCD display 8 digits and the outline size is
65x30x2.8mm………?
Answer: No problem. Firstly, please kindly send us your
specification/ drawing paper
If you have not the specification, you can also provide your samples; we will recommend the suitable
one
if it is standard products. Or we can customize for you based on
your own requirement.
2.This LCD is just what we want, but it is big size, do you have
any smaller size? And the display content need to be changed a little.
Answer: For the segment type LCD module, if you need modify the
outline size or display content,
a new LCD glass module is need. We have to open new tooling for you.
3. This LCD display is HTN type, but I want STN type,can you make?
Answer: That’s all right . we can change for you as per you request.
4. I want customize a new LCD module. Can you do?
Answer: Yes, we can. Please send your drawing paper. If you have
not, please advise me the outline size
of the LCD display, display information( Glass thickness, Polarizer, Display Type, Connector mode,
Storage Temp. Operating Temp. Supply Voltage, Viewing direction, drive condition), we can customize for you.
5. What is leading time for tooling?
Answer: General speaking, it will cost 15 to 25 days after drawing
paper confirmation and tooling charge payment,
we can report you the exact time when you confirm the drawing paper.
6. Can you send us samples for checking?
Answer: Yes,. Samples order is available.
7. What is the Leading Time?
Answer: If we have stock for the standard ones, the leading time is
one day after payment. If it is the mass production for
special ones, the leading time is about 15-30 days. suppose we can
finish earlier, we will report the information in advanced.
